If you cannot write to the disk or reformat it, then Current Read-only State will be set to Yes. This will be confirmed with the message that Disk 1 is now the selected disk. Once you're certain, it's time to select the disk. Making the effort to be totally certain at this stage is vital to the integrity of the data on your computer.
#CLEAR WRITE PROTECTION USB DRIVE PRO#
Also, note that USB flash drives can be as high as 1TB in capacity (like the PNY Pro Elite) at the time of writing, which could be larger than your computer's HDD. If not, you'll be able to confirm it in Windows Explorer.īefore proceeding further, be certain that you have identified the USB pen drive. You should be able to check the capacity on the device itself, as this is usually printed on a drive's casing. The next step is to navigate to the following path: Double-click the WriteProtect key located in the right side pane and set the value to 0.
Therefore, Disk 1 is the USB flash drive. To remove the write protection, simply open your Start menu, and click on Run. In the image above, while Disk 0 is 931GB, Disk 1 is 57GB. With a USB flash device connected (which will be Disk 1 or higher), you should be able to identify it by its comparatively low capacity. Use Diskpart to clear write-protection from the USB. Note that the size is displayed for each disk. If this method did not help to remove the write protection, proceed to the next step. If you have multiple partitions, these will be sequentially numbered. This is the one that Windows is installed on. But which is your USB drive?ĭisk 0 will be your computer's system drive. The resulting table will list the currently available devices. It's time to see which disks are attached to your computer: At the prompt, enter this:Ī new command line window will open with a new DISKPART prompt. You should now see CMD, the command-line tool. User Access Control will prompt you to confirm the action. You can open this by hitting Windows key + R, entering cmd, then hitting Enter. Windows has a built-in disk partition management tool called Diskpart. Open Start Menu > Run, type regedit and press Enter, this will open the registry editor.
#CLEAR WRITE PROTECTION USB DRIVE HOW TO#
How to Remove USB Write Protection With Diskpartīefore starting, insert your pen drive into your computer's USB port. Remove Write Protection On USB Pen Drive or Memory Card or iPod 1.
0 kommentar(er)
